The system is saving us £1.75 million per year.

Quinns, Northern Ireland

Solutions

Our key objective is to provide our customers with a solution that maintains operational efficiency through the reduction in moisture levels contained within the product. If you believe that your material has a permeability, we believe that we have the solution for you. We welcome the opportunity to test run any sample of a potential customer’s product(s) and we will provide you with the results following our testing procedure. All we ask from you is that you provide us with 6 x 25kg bags of the sample product. Should you have a moisture reduction requirement, or a requirement that you recycle the water, we would welcome the opportunity to discuss the suitability with you and provide assistance in line with your needs.

Bauxite stockpile with reduced residence time and lower moisture »

BACKGROUND Loading of wet material is often a challenge faced by many producers, particularly in climates that experience high rainfall. The increased moisture and water in the material leads to a reduced capacity in the total cargo load, but also leads to increased residence time for the stockpile to allow for natural drainage to take […]

.

View Post »

Tata Steel’s SEA Managing Director visits Moisture Reduction Systems’ excellent new coal stockpile moisture reduction system »

Moisture Reduction Systems Limited demonstrate and commission highly successful coal stockpile moisture reduction System for South East Asia Managing Director of Tata Steel with excellent results!      

.

View Post »

West Texas Sand Supplier enjoys 16% down to 4% moisture content overnight »

Moisture Reduction Systems installed a revolutionary new system to a major silica sand producer that supplies the Permian Basin’s oil and gas industry that transformed sand drying times. BACKGROUND The customer that operates multiple sites across Texas was conscious of the constant high operational cost of wet material requiring increased amounts of gas in the […]

.

View Post »

Pelletising plant pellet feed of 12.00% reduced to 5.00% moisture content »

MRS Ltd installed quick reaction system and achieved rapid moisture reduction for dockside client receiving Iron Ore off of large bulk carrier vessels. BACKGROUND The client had contacted Moisture Reduction Systems Limited after receiving a referral that they were the company to talk to with regards to reducing the moisture content in Iron Ore. The […]

.

View Post »

Steel producer’s coal stockpiles reduced from 12% down to 6.2% moisture content, India »

BACKGROUND Moisture Reduction Systems were contacted by one of the largest steel producers in the world to provide a solution that would give a regular and consistent moisture content throughout the year, particularly during the annual wet monsoon season. One of the problems that the client was experiencing was that the moisture levels were too […]

.

View Post »

MRS Ltd solve high moisture issues in DSO Sinter Feed at mine site guaranteeing TML »

BACKGROUND: Due to the significantly high rainfall in Africa; the customer was experiencing the consistent issue that the material was too wet to load and was resulting in the trains and vessels being loaded with reductions in throughput and capacity as a second intermediary stockpile was required prior to loading. The problem was enhanced by […]

.

View Post »

« Older Posts